Kitronik Temperature Sensor Breakout Board

Save 42%
Stock code: 5106
filler

Pricing:Ex VATInc VAT
1+
£2.00
£2.40
Was £3.45 £4.14
Stock:
Only 174 units left

Bundled options

Temperature Sensor Breakout Board plus soldering starter kit

large temperature sensor break out+ large soldering starter kit

Total: £12.99ex VAT

Description

AttributeValue
Length 28mm.
Width 28mm.
Height 3mm.
Operating Supply Voltage 3.0 to 5.5V
Operating Ambient Temperature Range −55 to 125 °C
ADC Resolution 12 Bit
Temperature Resolution 0.0625 °C
Accuracy (0°C to +70°C) ±1°C@
Accuracy (−25°C to +100°C) ±2°C@
Accu

Same Day Dispatch

  • Orders placed online before 3:00pm Monday - Friday (excluding public holidays and our Christmas shutdown period) are always dispatched the same day provided the goods are in stock. If the goods are not in stock we will endeavour to contact you as soon as possible to discuss a dispatch date.

UK Deliveries

  • If you live on the UK mainland and don't have any large materials or lithium batteries in your order it will cost £3.95 (£4.74 including VAT) if you spend less than £40 (£48 including VAT).
  • If you spend between £40 and £200 (£48 - £240.00 including VAT, excluding large materials or lithium batteries) delivery is free to most locations, £12 (£14.40 including VAT, excluding large materials or lithium batteries) to Northern Ireland and £15 (£18.00 including VAT, excluding large materials or lithium batteries) to UK remote locations. For a list of postcodes that will be charged the remote location rate click here.
  • If you spend over £200 (£240.00 including VAT, excluding large materials or lithium batteries) delivery is free within the UK.

Rest of the world

  • These orders are sent via UPS, and the cost is dependant on the service you choose at checkout. Alternatively you can choose the free collection option and have your own courier collect it from us. International orders can only be shipped to the registered card address. Please note: International orders may be charged import duty dependant on local import laws and duty rates. These charges are usually billed to you directly from UPS.
  • Delivery times vary for international orders depending on the service selected and the destination. You can see the delivery time and cost at the shipping stage, or by using the shipping estimator from within the shipping basket.

Collection

  • If you would like to collect your order, or use your own courier then there is an option you can select during checkout. We do not charge a packaging or handling fee for this service, and you will receive an email when your order has been processed, you can collect half an hour after receipt of this email.

Further Information

  • For information about all of the delivery options we offer click here.
Q:
Can a motor and or LED be added to the circuit as an alarm output?
Asked by: Georgia Hinde
A:
Hi Georgia, The board is designed to be used with a microcontroller such as Arduino as this is what reads the temperature that the board measures. You can then use the microcontroller to trigger a motor or LED.
Answered by: Michael Lockhart
13-Nov-18

Q:
How could you make this circuit on Yanka??
Asked by: Jane
A:

Hi Jane, Unfortunately we don’t have any details which we could supply to help draw this circuit on Yanka. Sorry.

Answered by: Michael Lockhart
26-Jan-17

Q:
Does it connect to the Basic 16x2 Character LCD - Black on Green 3.3V???
Asked by: Kenny
A:

Hi Kenny, although it is technically possible to do you would need to connect the breakout board to a microprocessor such as an Arduino and then connect this to the LCD display. You would need to have a good knowledge of coding in C to be able to do this.

Answered by: Michael Lockhart
29-Sep-16

Q:
Have 'you' ever actually connected several of these boards together ( with different addresses) ?
One device on its own works fine, but two (or more) appear to stop the SLC line i.e. no clock or data on the SLC and SDA lines ... driven from an Arduino 2560 Mega board.

I have other boards ( using the same NCT75 ic) which I assembled myself , and two 'boards' work fine. I'll try a third shortly, but your boards appear not to work when there is more than one on the Clock and Data bus.

regards
John
Asked by: john rowing
A:

Hi John, I’m glad to hear that by changing the pull up resistor on the clock and data lines have solved this issue.

Answered by: Michael Lockhart
08-Oct-15

Ask a question about this product

Name:
Email: (This will only be used to let you know the answer to your questions)
Question:

Payment & Security

American Express Apple Pay Google Pay Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed