large 4mm cherry veneered mdf 600mm 400mm sheet

additional 4mm cherry veneered mdf 600mm 400mm sheet

4mm Cherry Veneered MDF, 600mm x 400mm sheet

Stock code: 3259

Pricing:	Ex VAT	Inc VAT
1+	£5.80 (excl. VAT)	£6.96 (inc. VAT)
10+	£5.40	£6.48
100+	£5.05	£6.06

Stock:

In stock

Quantity:

UK delivery just £6.95

Order as much material as you like for a fixed price of £6.95

Price is ex VAT and excludes remote areas.

Quick links

Share this product

High quality A/B grade Cherry Veneered MDF panel measuring 600mm x 400mm. Ideal for structural projects requiring a high quality appearance and finish on both the topside and panelling. Suitable for laser cutting.

This MDF panel is veneered on both faces of the sheet with veneer made from cherrywood: A grade veneer on the front and B grade on the reverse.

Please note:

As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 10mm (see below - Tolerances and Caution).

A wood veneer is not like an artificial surface such as melamine or a laminate. It is cut from the log and therefore has its own unique grain, texture, and colour.

A Grade Veneer is a very high quality grading (typically the best you will see). The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter. This grade veneer is on the topside of this MDF sheet.

The B Grade Veneer underside shows the natural look of the veneer. There will be changes in colour that show the grain pattern. Sound, smooth knots are allowed and these will typically be under 15mm to 35mm in diameter (depending on the countries grading rules). The surface should normally be free from open knots and plugs. The material should be suitable for paint / stain or a lacquered finish.

There are two different cuts that can be used in veneer production:

'Quarter Cut' are cut at 90 degrees, producing the effect of a straight grain.
'Crown Cut' are sliced through the log, producing 'Crowns' and adding more character to the finish (as used on this product).

This product conforms to E1 (low) formaldehyde levels and is often described as 'Laser Grade' MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.

Features:

A/B grade Cherry Veneered finish.
Veneer thickness approximately 0.5mm.
High quality wood and veneer, for great looking finishes.
MDF core.
Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
Low formaldehyde emissions.

Dimensions:

Length: 600mm.
Width: 400mm.
Height: 4.0mm.
Veneer thickness (approximately): 0.5mm.

Video:

Tolerances:

The manufacturing tolerance for the thickness of veneered MDF sheets include the tolerance for both the MDF and the veneer. The

total combined thickness of both the MDF and the veneer could be as little as 3.70mm and as much as 4.30mm.

Caution:

As wood is a natural product there is often a bow or crook to the MDF, and in some cases a twist. We have measured in excess of 10mm rise between the flat centre of the MDF and the corner. These twists are completely normal. If you are using this product on a laser cutter; these sheets should be strapped/taped to the laser bed before cutting.

Note:

On all Perspex, acrylics, veneers, Styrofoam, polypropylene, plywood, wooden boxes, HIPS and MDF sheet orders (except A4/300mm x 200mm size) there is a flat delivery charge of £6.50 per order (most UK locations).

Same Day Dispatch

Orders placed online before 3:00pm Monday - Friday (excluding public holidays and our Christmas shutdown period) are always dispatched the same day provided the goods are in stock. If the goods are not in stock we will endeavour to contact you as soon as possible to discuss a dispatch date.

Large Materials

On all Perspex, acrylics, veneers, Styrofoam, polypropylene, plywood, HIPs, wooden boxes, and MDF sheets (except A4/300mm x 200mm size) a large materials charge applies per order.
This is £6.95 (£8.34 including VAT) for most UK locations, £12 (£14.40 including VAT) for Northern Ireland and £18.00 (£21.60 including VAT) for UK remote locations.
For a list of postcodes that will be charged the remote location rate: remote area list.

Rest of the world

These orders are sent via UPS, and the cost is dependant on the service you choose at checkout. Alternatively you can choose the free collection option and have your own courier collect it from us. International orders can only be shipped to the registered card address. Please note: International orders may be charged import duty dependant on local import laws and duty rates. These charges are usually billed to you directly from UPS.
Delivery times vary for international orders depending on the service selected and the destination. You can see the delivery time and cost at the shipping stage, or by using the shipping estimator from within the shipping basket.

Collection

If you would like to collect your order, or use your own courier then there is an option you can select during checkout. We do not charge a packaging or handling fee for this service, and you will receive an email when your order has been processed, you can collect half an hour after receipt of this email.

Further Information

For information about all of the delivery options we offer see full delivery details.

A guide on using laser materials

A selection of articles describing various aspects of working with laser materials.

A guide on using laser materials

A selection of articles describing various aspects of working with laser materials.

Stylish and Simple Clock Designs for Your Laser Cutter

The cover of the Kitronik's Summer 2019 flyer shows this stylish simple clock design. This is an excellent product to combine a number of natural and man-made materials in an...

Stylish and Simple Clock Designs for Your Laser Cutter

The cover of the Kitronik's Summer 2019 flyer shows this stylish simple clock design. This is an excellent product to combine a number of natural...

Q:

Hi Im interested in using your cherry vaneered mdf 600m x 400m x6m is it suitable for use as a pizza dough board?

Asked by: Dessie O'Neill

A:

Hi Dessie,

Thank you for your question, I would not recommend simply using it off the shelf for that purpose. I would suggest using a food safe sealant such as raw linseed oil but even then from what I know you would need to keep reapplying it.

Unfortunately this is not something a customer has asked to use this for before so I am unable to shed much more light on this I am afraid.

Best

Cullen

Answered by: Cullen Lewis

03-Sep-18

Q:

hi, im interested in buying a few sheets of cherry veneered wood for laser marking and cutting. can they be easily cut down by myself to fit my laser bed? 24 inch by 12 inch. are the sheets flat and no bows in them??
kr stu

Asked by: stuart cox

A:

Hi Stuart, It might be possible to cut this down, the core is just MDF so shouldn't be too difficult to cut. The key would be to make a clean cut on the veneer without this splintering,(masking tape over the board before cutting may help). Regarding the sheets being flat, typically we don't experience much twisting with MDF, however we have seen in excess of 10mm rise from the raised corner to the flat centre. The product does vary batch to batch and we do all we can to keep this at a minimum.

Answered by: Michael Lockhart

25-Jun-18

Ask a question about this product

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

4mm Cherry Veneered MDF, 600mm x 400mm sheet

Description

Please note:

Features:

Contents:

Dimensions:

Video:

Tolerances:

Caution:

Note:

Delivery Information

Same Day Dispatch

Large Materials

Rest of the world

Collection

Further Information

Related resources

A guide on using laser materials

A guide on using laser materials

Stylish and Simple Clock Designs for Your Laser Cutter

Stylish and Simple Clock Designs for Your Laser Cutter

Questions

Ask a question about this product

Payment & Security

You may also like

Recently viewed