Christmas Information: Kitronik will be closing 24th Dec December 2024, reopening on 2nd of January 2025. See our delivery schedule for more information.

Kitronik Clippable 360 Degree Servo

Stock code: 25111
filler

Pricing:Ex VATInc VAT
1+ £5.10
(excl. VAT)
£6.12
(inc. VAT)
10+ £4.65 £5.58
100+ £4.15 £4.98
Stock:
In stock

Buy locally from a partner

Bundled options

Clippable Servo plus Klip Motor Driver

Kitronik Clippable 360 Degree Servo 1+ Kitronik Klip Motor Driver for BBC micro:bit front

Total: £18.30ex VAT

Clippable Servo plus Klip Motor Driver and Crocodile Leads

Kitronik Clippable 360 Degree Servo 1+ Kitronik Klip Motor Driver for BBC micro:bit front+ Crocodile Leads, Pack of 10 Aligator Clips with 100mm Leads

Total: £21.00ex VAT

Description

This clippable servo has had the standard pin header replaced with super useful crocodile clips. This allows it to be used in projects that feature other clippable connection points, such as projects utilising the Kitronik Klip Motor Driver.

The 360-degree rotation servo features plastic gears, which although they are not as hard-wearing as their metal counterparts, they are lighter and suitable for most applications. The servo is rated to operate between 4.8V - 6V, and has a max stall torque of 1.5kg.cm@6V. If the clippable servo is being used in micro:bit projects, a separate power supply is required. If you are using the Kitronik Klip Motor Driver, the power can be taken directly from the Klip motor driver board.

The servo can rotate approx. 360 degrees and it can be driven with any standard 360-degree servo code/libraries. It can be coded using the MakeCode or Python editors which makes it ideal for novice or expert level microbit projects.

The servos are supplied with four horns and the associated fixings which should allow you to slot these servos into your projects with relative ease and without the need to make custom horns.

Note:

  • This servo requires a separate power supply from the controlling micro:bit. Attempting to power this servo directly from the micro:bit is likely to cause permanent damage to the micro:bit.

Features:

  • The clippable servo has had the standard pin header replaced with super useful crocodile clips.
  • Small and compact yet high power output, 1.5kg.cm@6V.
  • It can be coded using the MakeCode or Python editors
  • Suitable for RC models and Robotics projects.
  • 360 degrees of rotation.
  • Operating Voltage of 4.8V - 6V.
  • It can be used with Kitronik clippable micro:bit accessories, such as the Kitronik Klip Motor Driver.

Pin Assignments:

Servo Wire Colour. Clip Cover Colour. Connection Type.
Brown Wire. Black Clip Cover. GND.
Red Wire. Red Clip Cover. +ve.
Orange Wire. Yellow Clip Cover. Signal.

 

Contents:

  • 1 x Kitronik Clippable 360 Servo with 4 horns and fixings.

Dimensions:

  • Length:22.5mm.
  • Width: 12.1mm.
  • Height: 30.7mm.
  • Lead Length: 250mm.
  • Clip Length: 34mm.

Same Day Dispatch

  • Orders placed online before 3:00pm Monday - Friday (excluding public holidays and our Christmas shutdown period) are always dispatched the same day provided the goods are in stock. If the goods are not in stock we will endeavour to contact you as soon as possible to discuss a dispatch date.

UK Deliveries

  • If you live on the UK mainland and don't have any large materials or lithium batteries in your order it will cost £3.95 (£4.74 including VAT) if you spend less than £40 (£48 including VAT).
  • If you spend between £40 and £200 (£48 - £240.00 including VAT, excluding large materials or lithium batteries) delivery is free to most locations, £12 (£14.40 including VAT, excluding large materials or lithium batteries) to Northern Ireland and £15 (£18.00 including VAT, excluding large materials or lithium batteries) to UK remote locations. For a list of postcodes that will be charged the remote location rate: remote area list.
  • If you spend over £200 (£240.00 including VAT, excluding large materials or lithium batteries) delivery is free within the UK.

Rest of the world

  • These orders are sent via UPS, and the cost is dependant on the service you choose at checkout. Alternatively you can choose the free collection option and have your own courier collect it from us. International orders can only be shipped to the registered card address. Please note: International orders may be charged import duty dependant on local import laws and duty rates. These charges are usually billed to you directly from UPS.
  • Delivery times vary for international orders depending on the service selected and the destination. You can see the delivery time and cost at the shipping stage, or by using the shipping estimator from within the shipping basket.

Collection

  • If you would like to collect your order, or use your own courier then there is an option you can select during checkout. We do not charge a packaging or handling fee for this service, and you will receive an email when your order has been processed, you can collect half an hour after receipt of this email.

Further Information

Please note: Instructions for using this product (if available) can be found under the product description.
Kitronik Spooky Halloween 2018 Project Ideas featured image

With Halloween 2018 creeping up on us, we’ve made some spooky resources to give your decorations a techy twist! It’s a great time of year to test out some ideas...

Kitronik Spooky Halloween 2018 Project Ideas featured image

With Halloween 2018 creeping up on us, we’ve made some spooky resources to give your decorations a techy twist! It’s a great time of year...

Control A 360 Degree Servo With A BBC micro:bit featured image

We've recently added a continuous rotation servos to our range of stocked products. We thought it would be useful to do a quick tutorial on how to control one using...

Control A 360 Degree Servo With A BBC micro:bit featured image

We've recently added a continuous rotation servos to our range of stocked products. We thought it would be useful to do a quick tutorial on...

Trim A Continuous Rotation Servo With Code

In this quick tutorial, we are going to cover how to trim a continuous rotation servo with code. We will be writing our code in Microsoft's MakeCode Editor for the BBC...

Trim A Continuous Rotation Servo With Code

In this quick tutorial, we are going to cover how to trim a continuous rotation servo with code. We will be writing our code in Microsoft's...

Ask a question about this product




Payment & Security

American Express Apple Pay Diners Club Google Pay Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed