0
Your Cart
0
Your Cart
large white 3mm led

White 3mm Water Clear LED - 25deg - 2750mCd

Stock code: 35103
Pricing:Ex VATInc VAT
1+$0.20
(excl. VAT)
$0.24
(excl. VAT)
10+$0.12
(excl. VAT)
$0.14
(excl. VAT)
100+$0.11
(excl. VAT)
$0.13
(excl. VAT)
500+$0.09
(excl. VAT)
$0.11
(excl. VAT)

In stock

Decrease product quantity. Increase product quantity.
Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

SKU: 35103 Categories: , , , , , Tags: , , , , , , Brand:

Our White 3mm water clear LEDs have a forward voltage drop of 3.1V and at 20mA output 2705mCd.

They fit neatly into a 3mm holder and have a 25 degree viewing angle.

Features:

  • Water clear lens.
  • Standard White 3mm LED.

Contents:

  • 1 x White 3mm Water Clear LED – 2750mCd.

Requires:

Resources:

Documents & downloads

Technical Information

AttributeValue
Forward voltage drop 3.1V.
Viewing angle 25 degrees.
Typical forward current 20 mA.
Max forward current 25 mA.
Luminous intensity 2705 mCd (@20mA).
Lens types Water clear.
V
mA
V
Ohms
Ohms
Enter the operating voltage, click calculate resistor, and the resistor value to work with the LED described on this page will be shown.

Related resources

This product doesn't have any resources.

Reviews

There are no reviews yet.

Be the first to review “White 3mm Water Clear LED – 25deg – 2750mCd”

Your email address will not be published. Required fields are marked *

Questions and answers

    If I string enough of these LEDs in series, would I be able to run said string from the mains: say a string of 100? If so, would I need a rectified supply (240Vdc) for this to work, or would AC be OK? And what about current-limiting resistors in this scenario?
  1. 0 votes
    Q If I string enough of these LEDs in series, would I be able to run said string from the mains: sa...... Read more
    Asked by Anonymous on January 5, 2018 12:00 am
    Answered by the admin Hi Vernon, You would be able to power 1 LED from a mains wall power supply such as https://www.kitronik.co.uk/2208-5v-1a-micro-usb-uk-mains-wall-power-supply.html which is similar to a standard mobile phone charger, you could run around 40-50 LEDs depending on the current draw. You would be better putting the LEDs in parallel rather than series and each LED would require a suitably rated resistor which would vary depending on the LEDs you use and the power supply.
    2. Hi if I buy 2aa case with 3v with connector for 35103 led which is 3v do I still need resistor and where do I put it in line?
  2. 0 votes
    Q Hi if I buy 2aa case with 3v with connector for 35103 led which is 3v do I still need resistor an...... Read more
    Asked by Anonymous on December 4, 2017 12:00 am
    Answered by the admin Hi Susan, If you were using 3V with this LED you would need to put a 47 Ohm resistor in series with the LED. This value is based on using 3V with 1 LED.
To submit a question, please login or create an account

Related products