This is a high-quality AB/AB Italian Panguaneta Poplar Plywood sheet (laserply) that is suitable for a wide range of applications and is particularly suited to laser cutting. Panguaneta manages its own woodlands, so it knows that every last sheet has been produced responsibly, sustainably, and to the highest of standards. This Poplar Plywood has an AB/AB grading which is typically the best grade of plywood available.
Poplar has a lower density than Birch, meaning that it can be easily laser cut at lower power settings (See comparison image below).
Please note:As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 25mm (see below - Tolerances and Caution).
The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter.
This plywood uses an EN314-2 Class 1 glue which is suitable for Interior (dry) conditions. Interior glue is generally considered the preferred option for materials that are to be laser cut. This is because the exterior glues can cause a more obvious 'burnt' look on and around the area that is cut.
Poplar is a cultivated wood that grows quickly, which makes it a very sustainable product.
- High-quality poplar laser plywood sheets (laserply).
- Low density for easier laser cutting.
- Top-quality AB/AB grading means fewer knots aiding the consistency of laser cutting.
- Interior grade glue.
- 1 x 3mm Poplar Laser Plywood (laserply), 600mm x 400mm Sheet.
- Length: 600mm.
- Width: 400mm.
- Height: 3mm.
Watch this video below for information on how to use this product (please note: other Kitronik products are included in this video).
The manufacturing tolerance for the thickness of plywood sheets are the stated thickness +0.2mm/-0.4mm. This means a 3mm plywood sheet could be between 2.6mm and 3.2mm in thickness.
- As wood is a natural product there is often a bow or crook to plywood, and in some cases a twist. We have measured in excess of 25mm rise between the flat centre of the plywood and the corner. These twists are completely normal and add to the natural character of the plywood. If you are using this product on a laser cutter; these sheets should be strapped/taped to the laser bed before cutting.
- On all Perspex, acrylics, veneers, Styrofoam, polypropylene, plywood, wooden boxes, HIPS and MDF sheet orders (except A4/300mm x 200mm size) there is a flat delivery charge of £6.50 per order (most UK locations).
Same Day Dispatch
- Orders placed online before 3:00pm Monday - Friday (excluding public holidays and our Christmas shutdown period) are always dispatched the same day provided the goods are in stock. If the goods are not in stock we will endeavour to contact you as soon as possible to discuss a dispatch date.
- On all Perspex, acrylics, veneers, Styrofoam, polypropylene, plywood, HIPs, wooden boxes, and MDF sheets (except A4/300mm x 200mm size) a large materials charge applies per order.
- This is £6.50 (£7.80 including VAT) for most UK locations, £12 (£14.40 including VAT) for Northern Ireland and £18.00 (£21.60 including VAT) for UK remote locations.
- For a list of postcodes that will be charged the remote location rate: remote area list.
Rest of the world
- These orders are sent via UPS, and the cost is dependant on the service you choose at checkout. Alternatively you can choose the free collection option and have your own courier collect it from us. International orders can only be shipped to the registered card address. Please note: International orders may be charged import duty dependant on local import laws and duty rates. These charges are usually billed to you directly from UPS.
- Delivery times vary for international orders depending on the service selected and the destination. You can see the delivery time and cost at the shipping stage, or by using the shipping estimator from within the shipping basket.
- If you would like to collect your order, or use your own courier then there is an option you can select during checkout. We do not charge a packaging or handling fee for this service, and you will receive an email when your order has been processed, you can collect half an hour after receipt of this email.
- For information about all of the delivery options we offer see full delivery details.
Thank you for your question, standardly they come from Italy I believe. They are not FSC certified but are PEFC certified instead which is an equivalent certification.
Thank you for your question, the plywood is somewhat flexible but to be honest you are probably better off looking at the products on the link below for flexibility.
As both are a natural product they will both have a tendency to warp, however, we have measured a 25mm rise between the flat centre of the plywood and the corner of the 3mm birch laser ply and a 10mm rise between the flat centre of the plywood and the corner on the 3mm poplar laser ply.
Ask a question about this product
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.