use M3x6mm screws to attach the tipper bucket side panel (step 4 & 5) .
screws can not to fix the panel. screws will always fall down!
is there any way to fix it?
Hi HungJu, I'm not too sure what the problem is your having, but if it is the side panel of the tipper keeps failing on step 5 then this isn't a problem as once the servo is in place it will prevent the side moving up or down until you move the servo.
Do I have to have another microbit in order to control the tipper or can it all be done by the Bluetooth bitty app via correct coding?
Hi Dave, The Tipper Trailer is controlled by the same micro:bit that is attached to the Servo: lite board once the following modification has been made, https://www.kitronik.co.uk/blog/3-servos-with-the-servolite-board/. This third servo would be accessed via pin '0' on the micro:bit and code. So as long as you coded the button on the bitty app to trigger pin 0 then yes.
Ask a question about this product