Online Tutorial – Autonomous Robotics Platform for Pico - Using the Servo connections

Online Tutorial – Autonomous Robotics Platform for Pico - Using the Servo connections

The ARP has 4 servo connections. These can be used to control standard hobby servos. The servo connectors are located 2 towards the rear of the ARP, just outside the motors, and 2 towards the front, by the ultrasonic connector. Learn how to set up and code for the servos to enhance your robotics project.
zip halo hd alarm clock kit microbit main

Additional Online Resources For Kitronik Alarm Clock Kit

The Kitronik ZIP Halo HD for micro:bit provides the perfect platform for learning about creating time-based projects that also feature light and so...
Electro Fashion Day At Nottingham Trent University

Electro Fashion Day At Nottingham Trent University

Kevin and Tim were at NTU yesterday to see the fantastic projects that the students had created using products from our Electro Fashion range. Four ideas were presented on the day that were all excellent and all very different from each other. It was a thoroughly enjoyable and inspiring visit.
Igloo Tutorial 4: Fading LED - Pulse Width Modulation

Igloo Tutorial 4: Fading LED - Pulse Width Modulation

This tutorial demonstrates how to use an Igloo PICAXE wearable module to make the on-board LED blink on and off.
Igloo Tutorial 3: Blink - External Digital Output

Igloo Tutorial 3: Blink - External Digital Output

This tutorial demonstrates how to use an Igloo PICAXE wearable module to make a sewable E-textiles LED flash on and off.
Igloo Tutorial 2: Momentary Switch

Igloo Tutorial 2: Momentary Switch

This tutorial demonstrates how to use the Igloo's on-board push button switch as a momentary switch to turn the on-board LED on and off. The LED will come on while the button is held down and turn off when the button is released.
How to Make a Hook and Loop Switch

How to Make a Hook and Loop Switch

This Kitronik University course looks at making a conductive hook and loop (Velcro) switch.
Getting Started with Igloo: 'Hello World'

Getting Started with Igloo: 'Hello World'

This is a tutorial for Igloo, the Sewable PICAXE Controller Board from Kitronik. Tutorial 1: 'Hello World'.