Kitronik Bump and Spin Buggy Kit plus batteries
About the Buggy:
The Bump and Spin Buggy is an easy to assemble introductory kit which makes use of our Bump and Spin Kit to look at entry level robotics and allow you to quickly and easily make a working wall-sensing buggy. By following the step-by-step instructions (below) and downloading the sample program, you can program the buggy to your own specific requirements and get the buggy running in no time!
The buggy is a robot that is aware of its surroundings. Using two strategically placed microswitches the buggy is able to detect when it hits a solid surface, allowing it to 'bump and spin' to avoid obstacles.
A PICAXE USB Download Cable is required in order to program the buggy.
About the PCB:
The chassis of the buggy has been designed to take the hassle out of designing a buggy, is quick and easy to assemble and includes an easily accessible on/off switch. The buggy is based on the programmable PICAXE 08M2 chip and includes the DRV8833 Motor Driver IC which is able to drive two 6V motors bi-directionally. The motor driver IC is pre-mounted on the PCB, leaving the remaining capacitors, resistors and other components to be soldered to complete the kit. The bump and spin buggy takes care of the mechanics so you can focus on the electronics and programming it!
Programming the Buggy:
The kit is supplied with a 3.5mm stereo jack for programming. When programming the board a small slide switch needs to be set to 'PROG' and on completion be set to 'RUN' (This is done to make full use of the microcontroller IO pins). The input pads have a pull down resistor and a de-bounce capacitor allowing a switch to be connected to the board and the PIC programmed to respond to it with the minimum effort. The motors are driven by the DRV8833 motor driver IC which is pre-mounted on the board, this will drive 1.5A motors so has plenty enough power for most projects. The kit is supplied with a 4xAA battery cage to power the board.
- Buggy 'spins' and turns around when hitting an object.
- 'Bump' detection input on live bumper.
- Drives Two motors, with full direction control.
- Easily accessible on/off switch.
- 1.5 Amp drive per motor.
Buggy Chassis Contents:
- 2 x Right Angle Geared Hobby Motor.
- 2 x Wheel for Geared Hobby Motor.
- 2 x Micro Switch (Long Lever).
- 1 x 4xAA Covered Battery Holder with Switch and Leads.
- 1 x Laser cut Perspex chassis.
- 2 x 30mm Pan Head M3 Machine Screws.
- 2 x M3 Nuts.
- 4 x 16mm Pan Head M2 Machine Screws.
- 4 x M2 Hex Nuts.
- 8 x 6mm Pan Head M3 Machine Screws.
- 1 x Approx. 3cm strip of 50mm Wide Double-sided tape.
- 1 x Approx. 1m length of Multi-Strand Cable.
- 4 x 20mm Plastic Spacers.
Bump and Spin PCB Contents:
- 1 x PICAXE 08M2.
- 1 x Stereo PCB Socket.
- 1 x Miniature PCB Mount Slide Switch.
- 1 x 1N4148 Signal Diode.
- 2 x 10K Resistor.
- 1 x 22K Resistor.
- 3 x Capacitor, Electrolytic, 16V, 220uF.
- 3 x Capacitor, Ceramic, 50V, 100nF.
- 1 x Capacitor, Ceramic, 50V, 10nF.
- 1 x IC Socket 8 Pin.
- 1 x PP3 Battery Clip Lead (Heavy Duty).
- 1 x Bump and spin PCB, pre-populated with the surface mount DRV8833PWPR motor driver IC.
- Buggy Length: 160mm.
- Buggy Width: 165mm.
- PCB Length: 58mm.
- PCB Width: 43mm.
- 4 x AA Batteries.
- Soldering Iron.
- Wire Cutters.
- A computer with PICAXE programming editor software or similar installed on it.
- PICAXE USB Download Cable.
Same Day Dispatch
- Orders placed online before 3:00pm Monday - Friday (excluding public holidays and our Christmas shutdown period) are always dispatched the same day provided the goods are in stock. If the goods are not in stock we will endeavour to contact you as soon as possible to discuss a dispatch date.
- If you live on the UK mainland and don't have any large materials or lithium batteries in your order it will cost £3.95 (£4.74 including VAT) if you spend less than £40 (£48 including VAT).
- If you spend between £40 and £200 (£48 - £240.00 including VAT, excluding large materials or lithium batteries) delivery is free to most locations, £12 (£14.40 including VAT, excluding large materials or lithium batteries) to Northern Ireland and £15 (£18.00 including VAT, excluding large materials or lithium batteries) to UK remote locations. For a list of postcodes that will be charged the remote location rate click here.
- If you spend over £200 (£240.00 including VAT, excluding large materials or lithium batteries) delivery is free within the UK.
Rest of the world
- These orders are sent via UPS, and the cost is dependant on the service you choose at checkout. Alternatively you can choose the free collection option and have your own courier collect it from us. International orders can only be shipped to the registered card address. Please note: International orders may be charged import duty dependant on local import laws and duty rates. These charges are usually billed to you directly from UPS.
- Delivery times vary for international orders depending on the service selected and the destination. You can see the delivery time and cost at the shipping stage, or by using the shipping estimator from within the shipping basket.
- If you would like to collect your order, or use your own courier then there is an option you can select during checkout. We do not charge a packaging or handling fee for this service, and you will receive an email when your order has been processed, you can collect half an hour after receipt of this email.
- For information about all of the delivery options we offer click here.
How to solder - an introductory guide: If you're new to soldering our Soldering School will have you up and running in no time. What is soldering? Soldering is a...
How to solder - an introductory guide: If you're new to soldering our Soldering School will have you up and running in no time. What...
Hi Ben, I haven’t heard of this before so it is a little odd. I know the PICAXE IC has to have power supplied to it via the device it is plugged into such as the bump and spin kit. It could also be the software version you are using, check to see if the IC you are using is listed in the drop down list of the IC’s you can program to. Failing that PICAXE may be able to provide better help on this as I suspect it could be software related.
Hi Ali, You would need to use a PICAXE software, you can download one for free here, http://www.picaxe.com/Software
The code is provided on the product page, you just need to download it and install on your BBC micro:bit.
The kit includes everything you require for the kit, the only items you would need to purchase alongside are the batteries for the cage, and the download cable to enable you to program the PICAXE chip using the PICAXE software.
Ask a question about this product
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.