Kitronik :MOVE Sensor Interface Board for the BBC micro:bit

Liquid error (product-info line 88): -Infinity
Stock code: 5628
filler

Pricing:Ex VATInc VAT
1+
£5.42
£6.50
10+ £5.10 £6.12
50+ £4.60 £5.52
Stock:
In stock

Bundled options

Kitronik micro:bit :MOVE Sensor Interface Board plus Servo:Lite board for :MOVE mini

large sensor interface board move mini microbit+ large servo lite board move mini bbc microbit top

Total: £14.92ex VAT

Kitronik micro:bit :MOVE Sensor Interface Board plus :MOVE mini MK2 buggy kit

large sensor interface board move mini microbit+ large move mini mk 2 microbit built

Total: £28.37ex VAT

Description

Same Day Dispatch

  • Orders placed online before 3:00pm Monday - Friday (excluding public holidays and our Christmas shutdown period) are always dispatched the same day provided the goods are in stock. If the goods are not in stock we will endeavour to contact you as soon as possible to discuss a dispatch date.

UK Deliveries

  • If you live on the UK mainland and don't have any large materials or lithium batteries in your order it will cost £3.95 (£4.74 including VAT) if you spend less than £40 (£48 including VAT).
  • If you spend between £40 and £200 (£48 - £240.00 including VAT, excluding large materials or lithium batteries) delivery is free to most locations, £12 (£14.40 including VAT, excluding large materials or lithium batteries) to Northern Ireland and £15 (£18.00 including VAT, excluding large materials or lithium batteries) to UK remote locations. For a list of postcodes that will be charged the remote location rate: remote area list.
  • If you spend over £200 (£240.00 including VAT, excluding large materials or lithium batteries) delivery is free within the UK.

Rest of the world

  • These orders are sent via UPS, and the cost is dependant on the service you choose at checkout. Alternatively you can choose the free collection option and have your own courier collect it from us. International orders can only be shipped to the registered card address. Please note: International orders may be charged import duty dependant on local import laws and duty rates. These charges are usually billed to you directly from UPS.
  • Delivery times vary for international orders depending on the service selected and the destination. You can see the delivery time and cost at the shipping stage, or by using the shipping estimator from within the shipping basket.

Collection

  • If you would like to collect your order, or use your own courier then there is an option you can select during checkout. We do not charge a packaging or handling fee for this service, and you will receive an email when your order has been processed, you can collect half an hour after receipt of this email.

Further Information

Please note: Instructions for using this product (if available) can be found in the product description.
Adding ZIP Hex LEDs To The Simple Robotics Buggy Kit

A wide range of BBC micro:bit resources, what it is, the editors and using the micro:bit

Adding ZIP Hex LEDs To The Simple Robotics Buggy Kit

A wide range of BBC micro:bit resources, what it is, the editors and using the micro:bit

Q:
Hello, On the move interface card there are two additional connectors spare other than the line follower connection. What other sensors do you sell that connect to these other ports?

Can you connect another line follower sensor to one of these ports?

You mention also ultrasonic sensor is possible have you details or the sensor and cables?

Many Thanks Steve
Asked by: Steven Carter
A:
Hi Steve,

Thank you for your question, if you are looking at the board the line follower is broken out on the left hand side using pins 15-16. In the middle it breaks out pins 3-4 and the Right hand set break out Pins 19-20 through the I2C bus so you can use that breakout for I2C components. The top of the board has another connector that breaks out pins 8 and 10 and is designed for a 3.3V Ultra sonic sensor, unfortunately not something we stock any more.

https://www.kitronik.co.uk/46114-ultrasonic-distance-sensor-hc-sr04-3v3-tolerant.html

The link above is to what we used to use for the sensor and should just plug into that top port if you can locate a similar product.

Best Regards

Cullen
Answered by: Cullen Lewis
30-Apr-20

Q:
Is there a schematic for this board?
Asked by: Rich
A:
Hi Rich,

Thank you for your question, I am afraid there is not a schematic available for this kit.

Best Regards

Cullen
Answered by: Cullen Lewis
03-Apr-19

Ask a question about this product




Payment & Security

American Express Apple Pay Google Pay Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed