Kitronik Inventors Kit for Ardiuno - Exp 5 Control A Servo With A Potentiometer

Experiment 5 from the Inventors Kit for Arduino. In which we explore controlling the angle of a servo with a potentiometer. Included in this resource are code downloads, a description of the experiment, and also a video walkthrough. It provides additional help and is not meant to replace the documentation that ships with the kit. Arduino Inventors Kit Exp 5 Control A Servo With A Potentiometer Arduino is an open-source code-able electronics platform. The boards can process inputs from many sensors, and also control outputs such as LEDs and motors. The Arduino is controlled by the code with which it is programmed. This code is written in the Arduino programming language, using the Integrated Development Environment (IDE). Once complete, the code is easily transferred to the board using a simple USB lead.


Inventors Kit for Arduino Exp 5 Controlling A Servo With A Potentiometer:

The potentiometer will be used as an input to control the position of the servo. The varying voltage generated by the potentiometer will be read using an analog input. Because servos are a common device to control from an Arduino there is already a library of code we can use to control them. The aims of this experiment are:
  • To learn how to control a servo using the pre-written servo library.
  • And to use a potentiometer to set the angle the servo moves to.
  • Also, to learn how the map() function works.

Video Walkthrough:


Exp 5 Code:

Either open a new Sketch (File > New) then create the following code by typing in the editor window. Or, click the open code button in the editor to open the code in the online editor.

Inventors Kit Extra Resources:

Each of the ten experiments has been designed to ease you into coding and also physical computing for the Arduino. The experiments have been chosen to cover the key concepts of physical computing and they also increase in difficulty as you progress. If you are new to this, even the least complex examples can be quite challenging. With this in mind, we created walkthrough videos for each of the experiments. Our presenter talks you through the circuit in a way that backs up the information given in the booklet but in a style that some might find easier to absorb. As well as having a video walkthrough, each page also contains the code. Although it is always good to tackle the code yourself, it can be handy for testing your circuit. The code has been heavily commented as an extra learning resource. To get the most out of the experiment, once you've tested your circuit have a go at coding the experiment from scratch. Follow the links in the table below:  
Exp No#. Experiment Name.
Digital Inputs & Outputs.
Light Sensor & Analog Inputs.
Dimming an LED using a potentiometer.
Using a transistor to drive a motor.
Control a servo with a potentiometer.
Setting the tone with a piezo buzzer.
Using a seven segment display.
Exploring wind power.
Capacitor charge circuit.
Using an RGB LED.

Leave a comment

All comments are moderated before being published