New Product Update: a Beginner Parts Kit, a Resistor Kit, a Power Supply with Interchangeable AC Pins, and More!
Our new products this week include...


Beginner Parts Kit

Beginner Parts Kit that gives you all of the basic thru-hole components that you will need to get started playing with embedded projects. A good starter assortment of caps, ICs, regulators, diodes, and good-for-blinky LEDs. This assortment of parts makes a great gift for beginner and advanced electronics nerds! You may notice that there are no resistors in this kit. We recommend purchasing one of the resistor kits below for all of the resistor values that you may need. 4682_large_resistor_kit

Resistor Kit - 1/4W (500 total)

Resistors are a good thing, in fact, they're actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you're gonna have the resistor you need when you need it is to stock up, and keep them organised. This Resistor Kit comes with 25 each of 20 different resistor values (including 0Ω links!). All of these resistors are stapled into a tri-fold pack and clearly labelled. The back of the resistor kit even has a resistor colour code look-up chart and a table of colour codes for the included resistors! 2206_large_5V_2.5A_mains_wall_power-supply

5V 2.5A Mains Wall Power Supply (UK, EU, US and AU Adaptors)

A 15 watt plug top switch mode power supply with interchangeable AC pins. This unit is light weight and compact with a 90-264V universal AC input voltage for world use. The lead length is approximately 1.8m long with a 2.1mm DC Jack on the end.   4132_large_9v_pp3_battery_clip_lead_to_21mm_dc_connector

9V PP3 Battery Clip Lead to 2.1mm DC Connector

A PP3 to 2.1mm centre-positive barrel jack DC connector, useful for connecting a 9V battery or any of our battery cages with a clip. You can use this connector to power the RedBoard, which we added to stock just last week - see the full article here.

Leave a comment

All comments are moderated before being published