1W 8 Ohm Surface Transducer - Small
Let's begin with the 1W 8 Ohm Surface Transducer, which gives you the awesome power to turn almost any surface into a speaker. This is essentially just a speaker except instead of a cone, the coil is attached to a pad that conducts the vibration into whatever you press it against. You can hook it up to an audio source and press it against the nearest table, wall or cardboard box.3W/4W Subminiature High Power Speakers
The following two new additions are Subminiature High Power Speakers, designed for PC, monitor, notebook or similar applications where high sound quality is required in limited space environments. Rare-earth Neodymium magnets and foam rubber edged metallised cones are utilised to produce a superb quality full range output.3W 8 Ohm 20mm Subminiature High Power Speaker
Dimensions:
- Length: 20mm.
- Width: 20mm.
- Height: 9.5mm.
4W 8 Ohm 32mm Subminiature High Power Speaker
Dimensions:
- Length: 32mm.
- Width: 32mm.
- Height: 14.5mm.
2W/10W Mylar Cone Speakers
The following products are weatherproof Mylar Cone Speakers that are specifically designed for outdoor use as the Mylar cones are impervious to water or moisture and its wide frequency response makes them suitable for many applications including alarm sounders.2W 8 Ohm 66mm Round Mylar Cone Speaker
A weatherproof Mylar cone loudspeaker with ferrite magnets.Dimensions:
- Length: 66mm.
- Width: 66mm.
- Height: 20mm.
2W 8 Ohm 66mm Square Mylar Cone Speaker
A weatherproof Mylar cone loudspeaker with ferrite magnets and a square mounting bezel.Dimensions:
- Length: 66mm.
- Width: 66mm.
- Height: 20.5mm.
10W 8 Ohm 100mm Square Mylar Cone Speaker
A weatherproof Mylar cone loudspeaker with ferrite magnets and a square mounting bezel.Dimensions:
- Length: 102.4mm (Nominal).
- Width: 102.4mm (Nominal).
- Height: 36.5mm.
©Kitronik Ltd – You may print this page & link to it, but must not copy the page or part thereof without Kitronik's prior written consent.